Instruction Manual

Ifthemessageisnotsent,alowtonesoundsandthedisplayshowsnegativemininotice.

□ Non‐KeypadRadio
YoucansendQuickTextmessages,programmedbyyourdealer, viatheprogrammablebutton.
1.PresstheprogrammedOneTouchAccessbuttontosendapredefinedQuickTextmessageto
a
predefinedID.
2.TheLEDlightsupsolidred.
3.Twochirpsindicatethatthemessageissentsuccessfully.
OR
Alow‐pitchedtoneindicatesthatthemessagecannotbesent.

■ SendinganEmergencyAlarm
NOTE: If your radio is set to Silent, it will not display any
audio or visual indicators during
Emergencymode.
1.PresstheprogrammedEmergencyOnbutton.
2.ThedisplayshowsTxAlarmandthedestinationalias.
TheLEDblinksredandtheEmergencyiconappears.
OR
ThedisplayshowsTxTelegra mandthe destinationalias.TheLED blinks redandthe Emergency
icon
appears.
3.WhenanEmergencyAlarmacknowledgmentisreceived,theEmergencytonesoundsandthe
LEDlightsoff.ThedisplayshowsAlarmSent.
OR
Ifyour radio does not receiveanEmergencyAlarmacknowledgement,and after allretries have
beenexhausted,atonesoundsandthedisplayshowsAlarmFailed.
4.RadioexitstheEmergencyAlarmmodeandreturnstotheHomescreen.

■ Privacy
PresstheprogrammedPrivacybuttontotoggleprivacyonoroff.

■ FindingandConnectingtoaBluetoothDevice
NOTE: Do not turn off your Bluetooth‐enabled device or press
 during the finding and
connectingoperationasthiscancelstheoperation.
Apincodemayberequiredtobeprogrammedinyourradiobeforeitcanpairwithsomedevices.
Contactyourdealerformoreinformation.
□ FullKeypadRadio
□ LimitedKeypadRadio
1. Turn on your Bluetooth‐enabled
device and  place it in pairing mode. Refer to respective
Bluetooth‐enableddevice’susermanual.
2.Onyourradio,press
 toaccessthemenu.
3.
 or toBluetoothandpress  toselect.