User's Manual

■ AdjustingtheVolume
Toincreasethevolume,turntheOn/OffVolumeCon trolKnobclockwise. 
Todecreasethevolume,turnthisknobcounterclockwise.
■ AccessingtheRadiofromPassword
1.Poweruptheradio.
2.Youhearacontinuoustone.
3. Enter your current six‐digit password with the radio’s keypad.
 The display shows****** .
PressOKtoproceed.
Youhearapositiveindicatortoneforever ydigitpressed.Press toremovetheeach*on
thedisplay.
4.Ifthepasswordiscorrect:
Yourradioproceedstopowerup.SeePoweringUpandTurningOfftheRadiopart
OR
Ifthepasswordisincorrect:
ThedisplayshowsPasswordInputError.RepeatStep3.

■ SelectingaZone
A zone
 is a gr oup of channels. The full keypad and limited keypad radio supports up to 2000
channelsand250zones,withamaximumof160channelsperzone.
Usethefollowingproceduretoselectazone.

□ FullKeypadRadio
PresstheprogrammedZonebuttonandproceedtoStep2.
OR
Followtheprocedurebelow.
1.OKtoaccessthemenu.
2.
 or toZoneandpress  toselect.
3.Thecurrentzoneisdisplayedandindicatedbya ⊙.

□ LimitedKeypadRadio
PresstheprogrammedZonebuttonandproceedtoStep2.
1.OKtoaccessthemenu.
2.  or toZoneandpress  toselect.
3.Thecurrentzoneisdisplayedandindicatedbya ⊙.

□ Non‐KeypadRadio
Thenon‐keypadradiosupportsupto32channels and 2 zones,witha maximumof 16 channels
perzone.
1.PresstheprogrammedZonebutton.
2.Youhearapositiveindicatortone,
indicatingtheradiohasswitchedfromZone1toZone2.