User's Manual

FIXED STATION OPERATION
In order to use this transceiver for fixed station operation,
you will need a separate 13.8 V DC power supply (not
included). The recommended current capacity of your
power supply is 14 A or more.
1 Connect the DC power cable to the regulated DC
power supply and ensure that the polarities are correct
(Red: positive, Black: negative).
· Do not directly connect the transceiver to an AC
outlet.
·Use the supplied DC power cable to connect the
transceiver to a regulated power supply.
·Do not substitute a cable with smaller gauge wires.
2 Connect the transceiver's DC power connector to the
connector on the DC power cable.
Press the connectors firmly together until the locking tab
Clicks
Note:
◆
capabilities,we recommend using the power supply could
output more than 23 A, 25% duty cycle.
◆ Before connecting the DC power supply to the
transceiver, be sure to switch the transceiver and the DC
power supply OFF.
◆ Do not plug the DC power supply into an AC outlet until