User's Manual

1 Press [ ] (Power) briefly to switch the transceiver
power ON.
A power on beep sounds and a Power-on
message appears momentarily. The various indicators
and the current operating channel alias appear on the
LCD.
The transceiver stores the current parameters when it is
turned OFF and automatically recalls those parameters
the next time you turn the transceiver ON.
2 Turn the Volume
control clockwise to increase the
volume or reverse.
The transceiver stores the current parameters when it is
turned OFF and automatically recalls those parameters
the next time you turn the transceiver ON.
3 Turn the Up/Down
control to select a reception
channel.
You may further turn the Volume control to adjust the