User's Manual

4
Other voices from non-group members are
heard on the channel.
Analog: Change the
CTCSS/DCS tone, and make
sure change the tone on all
radios in your group
5
Communication range is too small.
·Make sure the antenna is well
connected.
·Make sure the antenna is the
originally supplied one.
·Ask your local dealer to adjust
the squelch level.
6
You cannot transmit even
though you press Mic
[PTT].
·
The microphone plug was not
inserted completely into the
front panel connector.
·Switch OFF the power, then
insert the microphone plug until
the locking tab clicks in place.
·You selected a transmit offset
that places the
transmit frequency outside
the allowable transmit
frequency range.
7 Noise is too loud.
· Beyond the efficient
communication range.