User's Manual
Table Of Contents
- Instruction Manual
- CU600-1 / CU600-2
- Two Way Radio
- CONTENTS
- 1、Open Package Inspection
- 3、Radio Overview
- 4、Basic Operations
- None
- Annunciation Type Selection
- CALL 1/CALL 2/CALL3/CALL4
- Lone Work
- Man-down
- Call Forward
- Squelch Adjust
- Monitor/ Call Cancel
- Squelch Off/ Call Cancel
- Battery Power Check
- FCS
- Normal Record/Record Stop
- Protect Record/Record Stop
- Record Play/Play Next/Play Stop
- Record Delete
- Top Button
- Side Button 1
- Side Button 2
Notice:
* Do not short-circuit the battery terminals or dispose the battery in fire.
* Do not disassemble the battery casing.
2.3 Installing the Antenna
Screw the antenna into the connector at the top of the radio by holding the bottom of the antenna
and turn it clockwise until secure.
2.4 Install external speaker/MIC
Open the cover of the jack for external speaker/MIC, and then insert the plug of the external
speaker or microphone into the jack on the radio.
6