User's Manual
Table Of Contents
- Instruction Manual
- CU600-1 / CU600-2
- Two Way Radio
- CONTENTS
- 1、Open Package Inspection
- 3、Radio Overview
- 4、Basic Operations
- None
- Annunciation Type Selection
- CALL 1/CALL 2/CALL3/CALL4
- Lone Work
- Man-down
- Call Forward
- Squelch Adjust
- Monitor/ Call Cancel
- Squelch Off/ Call Cancel
- Battery Power Check
- FCS
- Normal Record/Record Stop
- Protect Record/Record Stop
- Record Play/Play Next/Play Stop
- Record Delete
- Top Button
- Side Button 1
- Side Button 2
3、Radio Overview
① PTT
( PUSH-TO-TALK) Button
To make a call, press and hold the PTT button, then speak into the microphone in normal
voi
ce. Release the PTT button to receive signals.
② Side Button 1 (Progra
mmable Button)
③ Side Button 2(Program
mable Button)
④ T
op Button (Programmable Button)
⑤ Channel Selector
Rotate to select channel 1~16.
⑥ Power/V
olume Knob
Turn clockwise to switch on the radio.
Turn counterclockwise till a click is heard
to switch off the radio.
Rotate to adjust the volume after turning on the radio.
⑦ LED Indicat
or
LED Indicator Status/Alert. Green LED lights when signal have checked in the current
cha
nnel. Red LED lights during transmitting. Flashes orange when receiving the identical
5-Tone signaling or 5-Tone signaling or MDC signaling. Red led flashes when scanning or
low battery.
⑧ Speaker/Micr
ophone Jacks
Used to connect the optional speaker/microphone.
⑨ M
IC Hole
Please keep your mouth 3~ 5 cm away from the
microphone hole to achieve the best
voice quality. The distance is too far or too near will impact the voice quality.
8