User's Manual
Table Of Contents
- Instruction Manual
- CU600-1 / CU600-2
- Two Way Radio
- CONTENTS
- 1、Open Package Inspection
- 3、Radio Overview
- 4、Basic Operations
- None
- Annunciation Type Selection
- CALL 1/CALL 2/CALL3/CALL4
- Lone Work
- Man-down
- Call Forward
- Squelch Adjust
- Monitor/ Call Cancel
- Squelch Off/ Call Cancel
- Battery Power Check
- FCS
- Normal Record/Record Stop
- Protect Record/Record Stop
- Record Play/Play Next/Play Stop
- Record Delete
- Top Button
- Side Button 1
- Side Button 2
Release the PTT button and adjust the volume at the proper position to receive calls.
The dealer can set CTCSS/DCS, 5-Tone or 2-Tone or MDC on your radio. On the channels
preset
with these signaling, you cannot receive calls except those from the radios in the same
system
■ Programmable Button Function
The dealer can program the side button 1, side button 2 and the top button with the following
aux
iliary functions:
None (No Function)
Annunciation Type Selection
Talkaround
Call1/Call2/Call3/Call4
Lone Work
Emergency Call
Cancel Emergency Call
Man-Down
Scan
Noise Channel Delete
Call Forward
H/M/L Power Switch
Squelch Adjust
Monitor Momentary/Call Cancel
Monitor/Call Cancel
Lock Keyboard
Battery Check
FCS
Normal Record/Record Stop
Protect Record/Record Stop
Record play/Play Next/Play Stop
Record Delete
The dealer can program the following functions:
None
No Function is programmed.
Annunciation Type Selection
Pressing this key will cancel channel annunciation function, when you hear two times Tone ;
Rest
art, you can't hear again. Pressing this key will hear channel annunciation tone, when you hear
once tone ;Restart, you can hear again.
Talk Around
11