User's Manual

Cancel Emergency Call
Man-Down
Scan
Noise Channel Delete
Call Forward
H/M/L Power Switch
Squelch Adjust
Monitor Momentary/Call Cancel
Monitor/Call Cancel
Squelch Off Momentary/Call Cancel
Squelch Off/Call Cancel
Lock Keyboard
Battery Check
Surveillance
CTCSS Scan/Forever Save CH
CTCSS Scan/Save CH
When pressing a Key, notice the different beeps you will hear
No beep, key pressed not acknowledge
one beep, feature enable
two beeps, feature disable
“Error” beep, key pressed invalid
Voice prompt, state after key acknowledge
.
The dealer can program the following functions:
None
No Function is programmed.
Annunciation Selection
Press this key will disable or enable channel annunciation function.
Talk Around
Press this key will disable or enable Talk Around function. In talk around state, the radio will
transmit with the RX frequency of the channel.
CALL 1/CALL 2/CALL3/CALL4
Press the button set as “CALL 1/CALL 2/CALL3/CALL4” to transmit the stored code.
Lone Work
When the radio is set in lone work, it will sounds pre-alert tones before the Lone Work time
expires, and the user should press any key on the radio within the Reset Time, indicating the user