User's Manual Part 2

19
With HDMI, video contents being played by your Digix tablet can be
transferred to other displays using the HDMI cable. Such as an LCD TV
that has an HDMI port. The outputs the tablet supports can offer a
maximum resolution of 720P. The related operations are as follows:
1. Power on your Digix tablet.
2. Connect Digix to HDMI monitor with HDMI cable and power on the
monitor. At that time, on the status bar messages about HDMI connection
3. Play the video files on your Digix tablet.
4. Press MENU, and your tablet screen will turn black, a process lasting
about 5 seconds during which the contents are being switched to HDMI
monitor. Please be patient.
5. You can transfer the contents to the tablet again by any of the four
1) System transfers to tablet automatically after the playing is completed.
2) Press Menu during playing to switch the video contents to the tablet.
3) Pull out the HDMI cable during playing, after which the video contents
will be transferred to the tablet.
4) Press Back to exit the playing mode, after which the video contents
will be transferred to the tablet.
9. Using HDMI
10. Locking the device
11. Troubleshooting
11.1 Turning off applications
Once an application is turned on, it will occupy some space, and if there
are too many applications that have been turned on, it will slow down the
running speed of the device. Therefore you should close applications not
being used in a timely manner, so that more space can be saved and the
To turn off the application, click at the shortcut bar, and the system
will enter the interface of system settings, where you can select Application
will be pop up.
ways below:
device run faster.
Services, as shown below:
Running
Unlocking screen/device:
When the system is the sleep mode, you can short press the power
switch to enter the interface for screen locking. To unlock the screen,
move the corresponding icon upward, and the system will enter the state
prior to sleep mode.