User's Manual

If the BP is a digit， it would send the corresponding code. Otherwise, you could press
the ENT ,the message would be chosen, it is editable.
5.3 other special function
1、If the staff want to delete the unuseful message, follow the following process：
（1）Chosen the message would to be deleted
（2）Press“*”key，a tip box would be bounced up
（3）press ENT to delete，otherwise press ESC
6 Breakdown & Solution
1、When Swiping there's warning tone but there's no queue message in the
screen.
Reason：this coaster pager message didn't enter into the transmitter, or didn't
download the edited coaster pager message into the transmitter.
2、Sending the corresponding paging but the coaster pager without response.
Reason：try to page the other coaster pager to confirm whether this pager in question.
If so, to check whether the number and ID in the software correspond with the coaster
pager, or redispatch the coaster pager address and upgrade the transmitter.
3、The transmitter couldn't starting up
reason：To check whether the power is on and make sure the 12V/ supply. Whether the
program entered fail. Plug the power on, the screen would show "No to update the
program" for 1s, to prompt there's no program to be updated. At this time, close the
24