User's Manual

2、Check whether there's battery in the coaster pager.
3、Charge the coaster pager to full.
4、Power on the transmitter.
5、Transmitter parameter setting. There's memory function in the transmitter setup part. It
would remember the last time saved setting information.Unnecessary to set it up each time, if
any modification, pls enter into the set up interface to modify.
6、Enter the coaster pager data into the transmitter, and download it into the transmitter
through the data wire.
5.1.2 Queue
When taking out one coaster pager from the charger, it would make a self inspection,
voice and vibration 3s, the color light light 5s, showing 10s.
Then swipe the card in the transmitter swipe card area. If this pager has been entered,
then its information would be shown in the screen. At the same time, within one heart beat
interval, it would receive the queue information which sent from the transmitter ( the premise
is that the heart beat queue number function is open), at this time, the customer could take the
pager to wait the transmitter paging.
Remark：
When Swiping if in the wait meal mode, and open the input table , people number, then
the tip box would be bounced up, the number range is 0-99. If don't want to input, press the
ENT, it would default the people number as 0.
When Swiping in the take meal mode, and open the inputting order number function,
then the tip box would be bounced up, the number range is 0-9999. If don't want to input,
press the ENT, it would default the people number as 0.
5.1.3 Customer wait
1、To check the queue number （Open the queue number sending function)
During the waiting, customer could swing the coaster pager to check the NiXie tube display.
It is the coaster pager number (001-999); P-n (n>0,n<9)，n is the queue number.
2、Wait mean number decrease 1(Open the queue number sending function)
During waiting, if long DiDi with vibration and all the light flicking, to turn it that the
queue number decrease one, at the same time the queue number would show in the NiXie
22