User's Manual

waiter will receive the message and go to fetch dishes.
b. Program the transmitter and host to dispatch mode(B mode), input a three
digit number of the pager and maximum 5 digit table No. One palm, then press SEND
to send this table message to waiter pager to dispatch the waiter serve for that table
Notes: In this mode, the pager number has to be three digits, such as, No.1
please input as 001. Table No. can be from one to five digits, such as 1, 01, 001, 0001,
00001 which all means table No. 1.
 6). Monitor function:
After programming the monitor function, choose the relative monitor method, it
will send back to the monitor relative monitoring information.
 7) USB upgrade:
After using CA software to download the program successfully, the host need to
be repowered on. While power on, if “R” and “T” light flashes, which means it’s
upgrading. If it stops flashing, it means finishing upgrade. During the upgrade process,
remember not to cut off the host power supply, otherwise it will effect the upgrade.
Troubleshoots
Problems Solutions
Plug in the power supply, but
the power indicator light is
not on
Please check the socket whether there are 12V
current output and check the power switch of
the host is on