User's Manual

pager.
 3). Duty repage
The duty repage schedule is as following:
Press CALL, the button will repage as the preprogrammed schedule(such as 20
seconds, repage three times), if it sill has not been canceled by the CANCEL button, it
will start repaging the director, still as the preprogrammed schedule(times, interval), if
still not been canceled, then it will repage the superior director, after one time page,
the whole repage process ends.
In the process of repaging, if customers press the CALL for many times, the
repage won’t be interfered, just the waiter will receive more new pages. After repage
ends, if there are new page, the repage function will start again.
If in the process of repaging, press the CANCEL of the call, then the repage will
stop immediately. And the message in the pager will be deleted automatically.
 4). Send message through software
Open the software, input the pager No. and the message needs to be sent, the
length of the message is 48 digits or letters, then click send, if the software appear a
successful prompt and the TX light of the host is on, which means the message is sent
successfully. The pager will receive messages successfully.
 5). Usage of palm transmitter
Urge dishes and dispatch function can be realized by palm transmitter.
a. Program the palm transmitter and host to urge dishes mode(A mode), input
the table No.( call button No.) of the related dishes on palm, press SEND, then the