User's Manual

Network parameter setup as the above picture shows, you can
choose to use the web function and the mode of web host or sub-host. If
it’s used as web host, the host will transmit all the valid data which is
paged by all the sub host, and the web sub host will upload all the data
which are going to be paged to the host. If the sub host does not use the
transmission function, then the transmission mode can be modified as 485
output. Those worked as sub host, needs to input the host IP and interface
into the web host parameter. Each host needs to use different MAC ID,
which can be manually input or automatically generated.
ID: it’s the host ID, this is used when there is communication among