User's Manual

Host parameter as picture 5.4, room No. Switch is temporarily
invalid, the monitor function needs to work with monitoring software, it
can be setup as transmitting data, USB passback, net page
passback(customization required), among which transmitting data
monitor needs to setup pager receiver No., other modes do not need to
setup the No.
Repage setup, it can setup the pager and its director repage times and
interval.
Transmission mode, there are two modes: inner transmission mode
and 485 output, this choice is valid only for CA. For TA, only inner
transmission mode.
Picture5.4 Host Parameter Setup
3
Pager check time