User's Manual

5. Main Functions

5.1 SOS

In emergent case, press SOS for 3 seconds to activate SOS alarm.

Then the device will send SOS SMS to preset SOS numbers and

then dial the numbers in a loop for 3 times until the call is picked up.

Alarm message will also send to platform. (See command list 7-9)

5.2 Power cut-off alarm

When the electricity supply of device is cut off, it will activate cut-off

alarm.

5.3 Low battery alarm

When battery is low, the device will activate low battery alarm.

Device will send alert through SMS and to the platform.

5.4 Vibration alarm (default OFF)

When vehicle vibrates for several times, the vibration alarm will be

triggered. If ignition keeps OFF for 3 minutes (ACC OFF), the device

will send vibration alarm message immediately.(See command list 7-

13)

5.5 Voice monitoring

voice

When MIC and speaker are connected, use pre-set SOS number to

When MIC is connected while speaker is not, use pre-set SOS

number to dial the device, after 10 seconds, device enters into

monitoring mode automatically. The caller can hear the inside

the vehicle.

send command to the device. Device would automatically call

you back in a second. Pick up and monitor the voice inside the

vehicle.

JT#