User's Manual

5.Headphone Charging
6．Line in connection
This headphone is equipped with built-in non-detachable and rechargeable battery.
Please make sure that the battery is charged full for the first time use
■ Connect the adapter to the charging plug.
■ Insert the power adapter into the standard power plug. During the charging, indicator will turn to
Red. If without charging, please plug out the travel charger first, then connect it again.
■ After full charging, red indicator will be off. Please plug out the travel charger from the power
plug and headphone.
Insert 3.5mm audio input cable into headphone 3.5mm plug, the other part into audio output device
( MP3/PC), then you can enjoy music. If the bluetooth headphone is in “ON” status, insert Line in
cable will switch off bluetooth headphone power.
It will reduce the battery performance after long time / repeatable charge and dis-charge. And it is
normal phenomenon for all the rechargeable battery. Please do not dial or receive phone call when
charging, and please plug out the charger from the headphone,then receive the phone call. When the
battery is low, the headphone will appear the prompt and the red indicator will flash.
If the headphone shut down without battery during the phone call, it will switch to mobile phone automatically.
When someone call, press “ Function key” for 1-2 seconds to reject the call, you will hear “ Call termination”.
If there are two calls from two mobile phone, you only can reject the call from the main mobile phone.
Process of Use
16