User's Manual

6.35.2 GPRS User Name and password Setup
6.35.2.1 In most countries, the user name and password involving GPRS login are not
compulsorily necessary, therefore, the entry can be skipped. As for those countries
require user name and password, please configure as following:
6.35.2.2 Send SMS “up+password+space+user+space+password” If succeeded, the
tracker will reply “user, password ok!”
6.35.2.3 For instance, send SMS “up123456 web webgprs” to the tracker, and if
succeeded, tracker will reply “user, password OK”
Note: 123456 is password for the tracker, web is the user name for GPRS login,
webgprs is the password for GPRS login.
6.35.3 IP and Port Setup
6.35.3.1 Send SMS as below via a cell phone: “adminip+password+Space+IP (or DNS)
Address+Space+Port Number”. If succeeded, tracker will reply “adminip OK”.
6.35.3.2 For example: Send SMS command “adminip123456 04.gpstrackerxy.com 9000”
to the tracker, If succeeded, it will reply “adminip OK”. ( 123456 is default password，
04.gpstrackerxy.com is DNS，9000 is port).
6.35.4 Switch to GPRS mode
6.35.4.1 The default mode is “SMS”, Send SMS “GPRS+password” to the tracker, and it
will reply “GPRS ok!” it means the tracker has switched to “GPRS” mode.
6.35.4.2 TCP and UDP switch
Command: "gprs+password,0,0" switch to TCP mode, this is the default mode.
Command:"gprs+password,1,1" switch to UDP mode.
6.35.4.3 Send SMS “SMS+password” to the tracker, and it will reply “SMS ok!” and
restore to “SMS” mode.
6.36 Activate "Fuel" value in GPRS data
The default format of GPRS data doesn't include "Fuel" value, if you need "Fuel"value,
please send “protocol+password 18” to tracker, if succeed, it will reply "protocol 18 ok";
send “protocol+password 12” to change back to default mode, if succeed, it will reply
"protocol 12 ok".
6.37 Instructions for web platform and mobile APP
Users need to regsiter an account on www.gpstrackerxy.com before use web or APP platform,
account name and password is the same on web/APP platform
6.37.1 register an account