User's Manual

6.32 Terminal (local) Time Setting
6.32.1 Send SMS command “time+space+zone+password+space+time” to the device,
If succeed, it will reply “time OK”
6.32.2 For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your
country time zone is minus, send SMS “time zone123456 -8”.
6.33 Reset Hardware
Send SMS “reset+password” to tracker device to reset the WCDMA/GSM module and
GPS module of the tracker device, it will reply “reset ok”.
6.34 Configure parameters by USB
Connect tracker to computer with the optional USB cable, open the memory of the tracker,
find the initial configuration file, copy to your PC and open it with notepad
, then operate according to the instructions and save it, copy back to
memory to overwrite it and it will take effect immediately.
Note: Correct password is needed every time you configure the tracker.
6.35 GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS.
6.35.1 Configure APN
APN standards for Access Point Name of WCDMA/GSM network, it differs from
country to country. For more information about your local APN, please inquire with
your local GPRS network operator.
Send a SMS command to tracker “APN+password + Space + your local APN” via a
cell phone and if succeeded, the tracker will reply “APN OK”.
For example: Send SMS command “APN123456 CMNET”. If succeeded, the tracker
will reply “APN OK”.
Notes: 123456 refer to password of tracker and CMNET is the
APN of one of china GPRS Network Operator (China mobile).