User's Manual

29
section 6.1.
6.26.1.2 Configure user name and password
In the most countries, the user name and password of GPRS are not necessary; therefore, you
can ignore this step if it is not necessary for your local network. For those countries requiring
user name and password, please configure as following:
SMS command: up+password+space+user+space+password
Tracker response: user, password ok!
Example: up123456 Jonnes 666666
Note: 123456 means the password of the device, Jonnes means the user name of gprs, and
666666 means password of gprs, please configure it according to the user name and password
of your local ones, you can check this information with your local wireless carrier.
6.26.2 Configure domain name and port
Tracker connects to tracker.baanool.net:8090 by default. If you need to connect to another
domain name, please configure it.
SMS command: dns+password+space+DNS domain name+space+port
Tracker response: dns success!
Example 1: dns123456 04.GPSTrackerXY.com 9000
Example 2: dns123456 tracker.baanool.net 8090
Note: 123456 is tracker’s password, 04.GPSTrackerXY.com is the DNS, 9000 is port.
If you want to configure IP instead of DNS, then please send SMS command:
“adminip+password+space+IP+space+port”
6.26.3 GPRS / SMS mode switch
The GPRS mode is the default one, if you need to switch, pls refers to the following
instructions.
6.26.3.1 GPRS mode
SMS command: GPRS+password
Tracker response: GPRS OK! (It means it has been switched to GPRS mode.)
Example: GPRS123456
TCP / UDP switch
TCP mode is the default one; you don’t need to configure this step if the web platform works
with TCP mode, but you need to configure it as following when you are using a platform
which only works with UDP.
SMS command to switch to TCP mode: GPRS+password,0,0
SMS command to switch to UDP mode: GPRS+password,1,1
Tracker response: GPRS OK!
Example: GPRS123456,0,