User's Manual

28
Note: 8 is the time zone of China, If your country time zone is minus, write the
time zone value with a “-“ symbol, for example, time zone123456 -8.
6.24 Reset Hardware
This command will reboot the GSM and GPS modules of the tracker. Please note
this will not restore factory settings.
SMS Command: reset+password
Tracker Response: reset ok
Example: reset123456
6.25 Configure parameters by USB
Using the optional USB cable to connect the tracker to a computer and open the configuration
file with notepad, and then manually change the parameters and settings
according to the tips.
Note: You must enter the correct password of the tracker in the old password field every time
when changing the settings; otherwise, the changes won’t be successful.
6.26 GPRS configuration for live real-time tracking
6.26.1 Configure APN, GPRS login user name and password
Usually, tracker can automatically recognize and select the APN and GPRS’ user
name and password without any configuration. If it cannot connect to the
network,
Please configure it according to following steps.
6.26.1.1 Configure APN setting
APN is an abbreviation for Access Point Name and changes depending on which mobile
network you are using. For more information about your local APN, please check with your
local wireless carrier.
SMS command: APN+password+space+local APN
Tracker response: APN OK
Example: APN123456 CMNET
Note: 123456 is tracker’s default password, you can change the password on App or refers to