User's Manual
Table Of Contents
- Summary
- 2. Applications
- 3. Hardware Description
- 4. Specifications
- 5 Start to use
- 6. Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing (For BC model)
- Configure times of alarm SMS
- Alarms
- Remote control function (For C model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep Mode
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- Configure parameters by USB
- GPRS configuration for live real-time tracking
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- 7. Cautions
- 8. Troubleshooting
27
6.20.2 Sleep mode
SMS command: sleep+password+space+on
Tracker response: sleep on ok!
Example: sleep123456 on
When stop operating the tracker for 3 minutes, it will sleep if there aren’t any
alarm has been set up. Power for GPS module will be cut off, and vibration, a call
or SMS can wake up.
It consumes less data in sleep mode, GPRS automatically disconnects. When tracker
generates an alarm or the vehicle runs, GPRS automatically reconnects to the platform.
6.21 Check Status
SMS command: check+password
Tracker response:
Power: ON/OFF
Battery: 100%
Oil: 100%
GPRS: ON/OFF
GPS: OK/NO GPS
ACC: OFF/ON
GSM Signal: 1-32 (The higher, the better)
APN: cmnet
IP: 104.250.138.146
PORT: 9000
Example: check123456
6.22 Check IMEI
SMS command: imei+password
Tracker response: xxxxxxxxxxxxxxx (A 15 digits IMEI of your device)
Example: imei123456
6.23 Local time setting
Tracker works in the local time zone by default. If you find that the time zone is
incorrect, you can configure the time zone.
SMS command: time+space+zone+password+space+time zone value
Tracker responds: time ok
Example: time zone123456 8