User's Manual

26
There is a built-in three axis acceleration sensor in the tracker to detect the
movement, tilt and shock when in arming state and tracker will send “Sensor
alarm + latitude / longitude” to authorized numbers, and only one message in 3
minutes when tracker works in SMS mode. Siren （For C model） will beep for 5
seconds for the first trigger and second trigger, and then beep 10 seconds for
another trigger, disarming to quit the alarm.
Sensor’s sensitivity configuration
There are three different levels.
First level: Alarm will be triggered by slight vibration.
SMS command: sensitivity+password+space+1 .
Tracker response: sensitivity ok
Example: sensitivity123456 1
Second level: Alarm will be triggered by medium vibration.
SMS command: sensitivity+password+space+2
Tracker response: sensitivity ok
Example: sensitivity123456 2
Third level: Alarm will be triggered by severe vibration.
SMS command: sensitivity+password+space+3
Tracker response: sensitivity ok
Example: sensitivity123456 3
6.20 S le e p M o de
Sleep mode Description Application Occasions
Always
online
GPRS is real-time online, you can configure
different time intervals depends on moving or
motionless status.
Track the real-time
movements of the target.
Sleep
GPRS will be offline if it is motionless,
vibration, calling can wake up the tracker, GPRS
will be online if target is moving.
Sleep if the target is
motionless, and track
when the target starts to
move.
6.20.1 No sleep mode
SMS command: sleep+password+space+off
Tracker response: sleep off ok
Example: sleep123456 off
Tracker does not sleep, GSM and GPS work at all times. (Default mode)