User's Manual
Table Of Contents
- Summary
- 2. Applications
- 3. Hardware Description
- 4. Specifications
- 5 Start to use
- 6. Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing (For BC model)
- Configure times of alarm SMS
- Alarms
- Remote control function (For C model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep Mode
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- Configure parameters by USB
- GPRS configuration for live real-time tracking
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- 7. Cautions
- 8. Troubleshooting
21
SMS command: stop+password
Tracker response: Stop engine succeed
Example: stop123456
Once the immobilize function has been executed, it will remain immobile until you send
command to resume the fuel supply
Remote fuel resume
SMS command: resume+password
Tracker response: Resume engine Succeed
This means tracker will now resume the fuel & power supply.
6.13 Configure times of alarm SMS
The times of the message of a continuous alarm can be configured. 3 times messages by
default.
SMS command: xtime+password+times value
Tracker response: xtime ok!
Example: xtime123456 005 (It means to send messages 5 times.)
Note: The times value must be 3 digits.
6.14 Alarms
6.14.1 Low battery alarm
This feature is activated by default, when the battery is low, tracker will send message “low
battery + latitude & longitude” to authorized numbers for 2 times at 15 minutes interval.
Note: The times of this alert cannot be configured by the xtime command.
SMS command to deactivate: lowbattery+password+space+off
Tracker response: lowbattery off ok
Example: lowbattery123456 off
SMS command to activate: lowbattery+password+space+on
Tracker response: lowbattery on ok
Example: lowbattery123456 on
6.14.2 Power disconnection alarm
This feature activate by default. Tracker will send “Power alarm+latitude & longitude” to
authorized numbers every 3 minutes when external power disconnected