User's Manual

20
6.11 ACC ON/OFF Alert
This function is OFF by default.
SMS command to activate: ACC+password
Tracker Response: ACC ok
Example: ACC123456
If tracker detect “ignition on” signal from ACC wire (white wire), tracker will send “ACC
on+latitude & longitude” to authorize number to tell you the vehicle has been started. When
detect “ignition off” signal, it will send “ACC off+ latitude & longitude” to tell you the
vehicle has been stopped.
SMS command to deactivate: noACC+password
Tracker response: noACC ok
Example: noACC123456
It can only activate or deactivate the notification by SMS message to authorized phone
numbers, the notification to web platform cannot be deactivated and will always send
automatically.
6.12 Remote immobilizing (For BC m o de l )
Immobilizing way set up
Immobilizing way set up
Immediate execution way: Tracker will immobilize the vehicle immediately
SMS command:
quickstop+password
Tracker response: quickstop OK
Example:
quickstop123456
Delay execution way (Default setting): When receiving STOP command, tracker will check speed
and reply “
it will be executed after speed less than 20KM/H” if speed is higher than 20KM/H,
and delay executing this command until the speed is less than 20KM/H.
SMS command: noquickstop+password
Tracker response: noquickstop OK
Example: noquickstop123456
Remote immobilizing