GSM/GPRS/GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Contents 1. SUMMARY ................................................................................................................................................... 4 2. APPLICATIONS ............................................................................................................................................... 4 3. HARDWARE DESCRIPTION ........................................................................................................................ 4 4. SPECIFICATIONS ..........
6.17 SILENT ARMING .................................................................................................................................... 24 6.18 DISARMING ........................................................................................................................................... 25 6.19 ALARM FUNCTION IN ARMING S TATE ..................................................................................................... 25 6.20 SLEEP MODE ...............................
1. Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform. Features Built-in GSM, GPS antenna, small size, beautiful and elegant. Support GPS tracking solutions.
Weight Network Band frequency GPS sensitivity GPS accuracy GPS start time Voltage of power Back up battery Storage Temp Operation Temp. Waterproof Level 5 Start to use 50g GSM GSM 850: 824-849MHz(TX); 869-894MHz(RX) PCS 1900: 1850-1910MHz(TX); 1930-1990MHz(RX) -159dBm 5m Cold status 45s Warm status 35s Hot status 1s 12V - 24V Chargeable 3.
5.1 Terminal installation Please ask a qualified engineer to install it. The installation environment should not exceed the GSM performance index. Please do not install it in a dusty and humid environment.
①Open sealed buckle ②Insert the SIM card, the device will turn on automatically. ③Put sealed buckle back. 5.3 Turn on the device When use the device at first time, take the device at outdoor, the device will find GSM and GPS signal and work normally after 10-40 seconds. Under normal conditions, the indicator light of the device flashes once every 3 seconds. 5.
check with your local wireless carrier. SMS command: APN+password+space+local APN Tracker response: APN OK Example: APN123456 CMNET Note: 123456 is the default password, please change password on APP or refers to 6.1. CMNET is the APN of China mobile. 5.5.2 Configure user name and password of GPRS In t he most countries, the user name and password of GPRS a re not necessary; therefore, you can ignore this step if it is not necessary for your local network.
2 Choose BAANOOL IOV to enter it 3 Click “Me” “Device Management” “Add”, scan the QR CODE on the device or enter the IMEI manually to bind the device.
Scan QR CODE or enter the IMEI number Click to a dd th e 5.6.3 Position 1.Check the device: Click “Position” to enter the position page to see all the devices on the map, click the icon of the device to see the details including latitude & longtitude, speed, altitude, time, ACC status and alarm status, etc. and you can click “Navigate” to navigate you to that car.
Select the device 5.6.4 Control After selected the device, then click “Control” to enter control page to use function of single track, continuously track, Arm / Disarm and Geo-fence, etc.
Create a n ew Geo-fence Click to check the Geo-fence 5.6.5 Device management After s elected the d evice, click “Me” t o management pa ge t o add device, change de vice’s information, delete settings, group management and sub-account management. 5.
5.7.1 Register Open http://www.baanool.net to register a new account. Click register Enter IMEI, account, password, mobile phone No. (For forget password purpose) to finish the registration. 5.7.
Entery our account and password to login 5.7.
Enter IMEI Device name Choose an icon for device Click to save it This device you just added is still offline If t he device i s always offline ( Grey color), pl ease m ake sure t he SIM card subscribes t he GPRS service, and have credit to surf the Internet, you can put the SIM card in the phone to test if it can surf the Internet. Besides, please also check if the configurations of APN, user name & password are correct, refers to section 6.26 for more information. 6.
6.2 Authorization The authorized numbers are used to receive the various alerts, such as SOS, Geo-fence and movement alert, etc. Up to 5 numbers can be authorized. If you call the tracker 10 times in succession, the number will be authorized automatically as the first number and tracker response “add master ok”. Alternatively, you can authorize your number in the following way: 6.2.
When it lost fix to satellites, the message will include the last known GPS position and a LAC code of the updated position as well. 6.4 Continuous interval tracking 6.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password Tracker response: It will update positions at 30 seconds interval when ACC ON and 600 seconds when ACC OFF for 5 times. Example: fix030s600s005n123456 Note: The numbers in the command must be 3 digits and maximum times allowed are 255 times.
Example: fix030s600s***n123456 0200 6.4.5 Cancel interval tracking SMS command: nofix+password Tracker response: nofix ok Example: nofix123456 6.5 Smart angle updating It will update positions automatically to web platform when the vehicle changes driving direction over a pre set angle value to make its trace following the actual road and seem better on the map. This function is only available in GPRS mode.
After APN ha s be en s et up , s end " address+password" , it w ill r eply i n exact addr ess including s treet na me. For e xample: N o.113, G uankou 2nd R d, N antou, N anshan di strict, Shenzhen, Guangdong, china. 6.
6.11 ACC ON/OFF Alert This function is OFF by default. SMS command to activate: ACC+password Tracker Response: ACC ok Example: ACC123456 If tracker detect “ignition on” signal from ACC wire (white wire), tracker will send “ACC on+latitude & longitude” to authorize number to tell you the vehicle has been started. When detect “ignition off” signal, it will send “ACC off+ latitude & longitude” to tell you the vehicle has been stopped.
SMS command: stop+password Tracker response: Stop engine succeed Example: stop123456 Once the immobilize function has been executed, it will remain immobile until you send command to resume the fuel supply Remote fuel resume SMS command: resume+password Tracker response: Resume engine Succeed This means tracker will now resume the fuel & power supply. 6.13 Configure times of alarm SMS The times of the message of a continuous alarm can be configured. 3 times messages by default.
SMS command to deactivate: extpower +password+space+off Tracker response: extpower off ok Example: expower123456 off SMS command to activate: extpower +password+space+on Tracker response: extpower on ok Example: expower123456 on 6.14.3 Blind area alarm This feature is deactivated by default, tracker will send SMS notification “No gps+latitude & longtitude of the last know position.” to authorized numbers if lost fix to GPS satellites.
Note: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, and the second latitude & longitude is the coordinate of the bottom right corner. To configure the Geo-fence the tracker must fix to satellites and be stationery for about 3-10 minutes. 6.14.6 Movement alarm The movement feature will create a circle area with a set radius (200 meters by default).
6.15 Remote control function (For C model) Key Function Arming Disarming Silent arming SOS Deterrence/ Car locate Descriptions Press for 0.5 second, the siren will beep one time. Press for 0.5 second, the siren will beep two times. Press for 0.5 second when it is in disarm state, the siren will beep one time. In silent mode, the siren will not sound even if an alarm is triggered. DISARM will quit from silent mode. Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers.
After tracker enters into the silent arming state, the siren doesn’t sound even if an alarm is triggered, but tracker will send alarm notification to authorized numbers. 6.17.2 Silent arming with remote control (For C model) Press key in disarm state for 0.5 second, the siren will beep one time, tracker will enter into silent arming state, the siren doesn’t sound even if an alarm is triggered, but tracker will send alarm notification to authorized numbers. 6.18 Disarming 6.18.
There is a built-in three axis acceleration sensor in the tracker to detect the movement, tilt and shock when in arming state and tracker will send “Sensor alarm + latitude / longitude” to authorized numbers, and only one message in 3 minutes when tracker works in SMS mode. Siren （For C model） will beep for 5 seconds for the first trigger and second trigger, and then beep 10 seconds for another trigger, disarming to quit the alarm. Sensor’s sensitivity configuration There are three different levels.
6.20.2 Sleep mode SMS command: sleep+password+space+on Tracker response: sleep on ok! Example: sleep123456 on When stop operating the tracker for 3 minutes, it will sleep if there aren’t any alarm has been set up. Power for GPS module will be cut off, and vibration, a call or SMS can wake up. It consumes less data in sleep mode, GPRS automatically disconnects. When tracker generates an alarm or the vehicle runs, GPRS automatically reconnects to the platform. 6.
Note: 8 is the time zone of China, If your country time zone is minus, write the time zone value with a “-“ symbol, for example, time zone123456 -8. 6.24 Reset Hardware This command will reboot the GSM and GPS modules of the tracker. Please note this will not restore factory settings. SMS Command: reset+password Tracker Response: reset ok Example: reset123456 6.
section 6.1. 6.26.1.2 Configure user name and password In the most countries, the user name and password of GPRS are not necessary; therefore, you can ignore this step if it is not necessary for your local network.
GPRS123456,1,1 6.26.3.2 SMS mode Switch to SMS mode will disconnect the GPRS connection for live tracking. SMS command: SMS+password Tracker response: SMS OK! ( It means it has been switched to SMS mode.) Example: SMS123456 6.
Tracker response: begin ok Example: begin123456 7. CAUTIONS Please be sure to follow when using: 1. Keep the tracker used in a dry environment. The humid environment can easily damage internal circuits. 2. Please do not put it in a dusty environment. 3. Do not put the tracker in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5. Please clean with a dry cloth, do not use chemicals and detergents. 6.
No alarm notification message 1. Authorized number has not been set up. 2. The format of the phone number is incorrect. Fail to stop engine 1. Please check whether the engine stop wiring connected correctly? 2. Please check whether the speed is higher than the speed to execute the stop command when using Delay execution way? Remote control cannot be used Turn off tracker, and turn it on to program the remote control again.
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
