User's Manual

2) Power ON/OFF
Power ON: Press and hold the "Power button" for 2 seconds. The screenlights up and
the animation on screenindicates that the device is turned on, system will boot to
MSA User Interface.
Power OFF: Press and hold the "Power button" for 2 seconds, the screen will show
"Shutdown" or "Restart". Select "Shutdown", the screen turn off indicates that the
machine has been shut down.
Restart: Press and hold the "Power button" for 2 seconds, the screen will show
"Shutdown" or "Restart". Select "Restart", the screen will turn offand lights up again,
the animation on screen indicates that device is restarting, system will boot to MSA
user Interface.
3) Connecting to Internet
Built-in virtual SIM card for network connection: Wait for network signal on the
upper right corner after power on. The network connected successfully when the
signal shows "4G".
SIM card slot: Please power off the device, Insert the nano-sim card, and then turn
on the device. The network is connected successfully if the network signal on the
upper right corner shows “4G”. If you insert the nano-sim card during device
power-on state, please restart the device and wait for the network signal shows
“4G”.