User's Manual

2. Installation guide
(1) Turn off the car engine
(2) Find a suitable position in the car that does not affect driving, then wipe the
surrounding glass, install the bracket and hang the camera
(3) Tear off the protective film on the lens, make sure the lens is clean, adjust the
lens position, so that the lens and the ground remain at a level
(4) Plug one end of the power cord into the power socket of the camera, and the
other end into the power socket of the car
(5) Start the engine and check if the camera has been installed correctly
3. Recording/ taking pictures instructions
■
Recording
Turn on the camera and enter recording mode, the upper left corner of the screen
shows the video icon . Start recording, there will be a red dot flashing on the
screen under recording status. At the same time in the recording, you can not
operate the menu and switch the working mode, then short press OK to stop the
recording
■ Taking pictures
In the stop recording state, short press MODE to switch to photo mode, the upper