User's Manual

1 2
INSTALL THE APP
Search the keyword ’BBQ Star’ in APP Store or
Google Play or scan the following QR code.
USER MANUAL
Wireless Meat Thermometer
Model:CXL001
HOW TO CONNECT
1)Turn on the bluetooth of your mobile phone(ios system)
Android have to turn on the Bluetooth and GPS at the
same time.
2)Click the APP page,and the probe will connect
automatically.
BBQ Star
HOW TO CHARGE
Inset the Micro USB Cable,Put the
probe intothe charger, and waiting for
20minutes.
Payattention:
1)If the light is green it means fully charge.
2)If the light is red after 20 minutes, you
can also use it normally, which mean that
the power of the probe is about 95%.
3)If the probe is charging, the bluetooth does
not work.
3
4
5
SERVICE
If you need any further information or assistance, please feel
free to contact us diretly,then we will reply you at the first time
and do our best to solve it.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Statement:This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
WARNING
1)Do not use the probe in the mircrowave.
2)Ensure the probe is completely dry before placing it
back in the charger.
3)The probe is designed for use in meat.
4)Android phones and tablets need to turn on the GPS
in advance.
5)If your oven has anti radiation function, Bluetooth
transmission distance will be affected.
6
FEATURES
*Test of the meat Temperature:-40 -100°C(-40°F-212°F)
*Bluetooth Version: Bluetooth 5.2
*Waterproof of the probe:IP67
*Distance of the bluetooth:50meters(165ft)
*Charging time:20minutes
*Working time:6hours
*Probe: APP can support 6 probe at the same time
°
C