Instruction Manual

ManualsBrandsShenzhen chuangxinlian Electronics ManualsKitchen ToolsWireless meat thermometer

Instruction manual

1. Product packaging and accessories:

L001-c charging base 1PCS temperature probe 1PCS type-c USB cable 1PCS

instruction 1pcs carton packaging.

2. The smart device APP shows:

1. APPle app: apple store: AICOOKING

2. Android APP ：google Store: AICOOKING

1) When installing the APP, please pay attention to allowing the software to obtain

the positioning function to ensure smooth connection. (This product is a pure

stand-alone machine with no networking function, and all data are stored locally by

customers, and our company does not store any data. )

2) Before using the relay, the APP needs to choose the relay mode, which is the direct

connection mode by default. After selecting the relay mode, the relay will directly

connect the probe Bluetooth to receive data and directly transmit it to the mobile

APP for display, but the probe can't directly connect to the mobile APP. If there is

little interference, the APP can directly choose to switch to the direct connection

mode. The probe can only be connected to one intelligent device, but after

connecting the intelligent device, it can't be connected to the relay device at the

same time. The probe can be turned off temporarily by charging function to cut off

the connection with the APP. Or close the APP or turn off bluetooth to disconnect.

3) The product has no manual shutdown function. The product automatically shuts

down when charging, turns on after disconnecting the charging, and automatically

shuts down when the power is used up. The product has its own charging protection

function, and the product can be stuck into the charging base for a long time to keep

charging. After 20 minutes of capacitor charging, the intelligent charging system will

automatically cut off the charging circuit and keep the product off.

4) After opening the APP, after turning on the positioning and Bluetooth functions,

take off the temperature measuring probe from the base, and the product will

automatically connect to the APP. If it has not been connected for a long time, the

APP has a manual connection function. Please refer to the product manual for

details.

5) The highest temperature resistance of the product temperature measuring area is

140 degrees Celsius. After the temperature exceeds 140 degrees Celsius, the

temperature measuring area must be inserted into food before it can be put into the

high temperature area (see the figure below for the correct insertion of the product

into food), and the highest temperature resistance of the product is 300 degrees

Celsius.

6) After choosing a good recipe, the APP will have an estimated completion time

Summary of content (5 pages)

PAGE 1
Instruction manual 1. Product packaging and accessories: L001-c charging base 1PCS temperature probe 1PCS type-c USB cable 1PCS instruction 1pcs carton packaging. 2. The smart device APP shows: 1. APPle app: apple store: AICOOKING 2. Android APP ：google Store: AICOOKING 1) When installing the APP, please pay attention to allowing the software to obtain the positioning function to ensure smooth connection.
PAGE 2
when it is heated to more than 5 degrees Celsius. The countdown time will be automatically corrected according to the heating speed of the ingredients. Stopping the heating in the middle or changing the heating speed will change the estimated time value. (Convenient for guests to arrange their time reasonably) charging base: 1) Charging requires a charger with more than 5V1. It can be fully charged after about 3 hours. (The charging red light flashes, and the red light is always on after full charge.
PAGE 3
Advantages: 1. The product adopts digital pulse temperature measuring IC, which is accurate in temperature measurement, simple to use and without debugging. 2. Completely wireless connection. The temperature measuring part and the display part are displayed by Bluetooth intelligent connected intelligent devices, with long transmission distance and stable performance. 3.
PAGE 4
normally. 6. Multi-probe simultaneous connection may cause interference, resulting in short-term disconnection, which can be automatically connected soon, which is normal. 7. After the probe is loaded, the display sequence of the mobile phone is fixed. The base has a Bluetooth connection status indicator. 8.
PAGE 5
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.