Users Manual

Keys Function Description
1 F1
2 F2
3 F3
4 F4
5 F5
6 F6
7 F7
8 F8
9 F9
0 F10
-_ F11
=+ F12
ESC `~
P PRINT
[{ HOME
]} DELETE
LEFT speed + five levels-default third level
RIGHT speed - five levels-default third level
UP brightness + five levels-the brightest by default
DOWN brightness - five levels-the brightest by default
?/
Floating with the flow, rippling, running away from the
dust, stepping on the snow without a trace, grid,
breathing, constant light, hors e racing.
\| Switch to custom mode
=
FN +
CTRL_L CTRL_L CAP and CTRL_L interchange
SPACE pause mode Lighting effect pause
ENTER color switch
Win_L Windown lock lock Win_L、APP
A Custom recording
S Custom recording
Q
Bluetooth device
connection,and device
switching
Long press 3S to connection, short press to switch
devices
W
Bluetooth device connection ,
device switching
Long press 3S to connection, short press to switch
devices
E
Bluetooth device
connection,device switching
Long press 3S to connection, short press to switch
devices
R Working mode switch Switch to USB mode, Bluetooth mode
T
Bluetooth single carrier test
mode
Low frequency
Y
Bluetooth single carrier test
mode
Medium frequency
U
Bluetooth single carrier test
mode
High frequency
Reset
Long press 3S to start recording, A flashes; press A
again, recording is complete
At the same time ESC and BACKSPACE and CTRL_L+ and direction right 3S to open reset
FN +
Keyboard
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure
requirement