Product Description

Shenzhen CHT Technology Co., Ltd.
Rev:1.4
 first page A total of 7 pages
15. The channel light flashes when the adapter is inserted, and then the channel light goes off when it is fully charged.
16. When the handle is charging on line, the corresponding channel light will flash slowly and light long after it is full.
17. 5. Low power alarm
18. When the battery voltage of the handle is lower than 3.6V, the light of the corresponding channel flashes to indicate
that the power of the handle is low and it is necessary to charge the handle.
19. 6. Standby
20. When the handle is in the power-on state, press the "docking" button to stand by.
21. When the handle is in the pairing state, it will automatically stand by when the code cannot be adjusted after 60
seconds.
22. 7. Reset function
23. When the handle is abnormal, it can be reset by pressing the "butt" button.
24. 8. Receiving distance
25. The effective receiving distance of the handle is within 10M.
26. 9. Reference current
27. Sleeping current: less than 2uA;
28. Pairing current: less than 20mA;
29. Operating current (without vibration) : less than 20mA.
30. 5. Electrical specification of handle
31. Power supply: Built-in polymer battery Duration: 8-10 hours
32. Battery capacity: 500mAh Charging time: 2.5 hours
33. Charging voltage: DC5V Charging current: 200mA
34. 6. Instructions for Bluetooth connection to Switch host
35. (1) Click the "House" icon on the right side of the screen to enter the main menu after switching on the host, as shown below:
36. 9. Reference current
37. Sleeping current: less than 2uA;
38. Pairing current: less than 20mA;
39. Operating current (without vibration) : less than 20mA.
Click the "Contrellers" item in the main menu of Switch host, as shown