User's Manual

Basics Info
PairingCharging and Activating
Device needs to be activated by charging it for the first time
after opening the box. Put the magnetic charging part to the
back of the device as shown on following picture below and
connect it to the USB from the wall charger or the USB port
from the PC.
Open the App and set up your profile
Go to the 「Device」 , Click 「Add a Device」
Choose device "G10" on the scanning list
Finish
The device can be identified by its’ MAC address. You
can find this MAC address from Home Screen by pressed
longer on the touch screen.
Once pairing done, the device will automatically connect
with the smart phone and sync all data on the App.
Sports & Training
Motor Pattern
The device can record steps taken,
calories burned and distance
traveled. You can check from the
App for more detailed data. The
device will reset to 0 at midnight
everyday.
Motor Pattern & Heart Rate
Heart Rate
Pressed longer on the Heart Rate
screen to start measuring your heart
rate. It will show the last 7 datas
recorded previously.
Sports
The device automatically tracks steps
taken and displays the count on the
screen. It will display your all-day
calories burned and distance traveled
Note: Your movement stats reset to
zero at midnight.
Training
Pressed longer on the Training screen
to start recording your training. It will
keep 1 data recorded previously. You
can refer to App for more detail of
your training stats.
Blood Pressure & SPO2
Blood pressure
Pressed longer on the Blood
Pressure screen to start measuring
your blood pressure. It will show
the last 7 datas recorded
previously.
SPO2
Pressed longer on SPO2 screen to
start measure your SPO2. It will
show the last 7 datas recorded
previously.
Weather & Messages
Weather
The device will show today and
tomorrow's weather and air quality.
Please sync to the App for updated
information.
Shutter & Player
Remote shutter
The device can control smart phone
camera's photo shoot. Pressing
longer on the Shutter screen while
camera is ON for smart phone to take
the picture.
Music Player Controller
The device can control the music
played on smart phone while sync
with it.
Others & Stopwatch
Other Features
The device also includes other
features such as stopwatch, bright
adjustment, mute, factory reset and
power off.
Stopwatch
Pressed longer on Stopwatch screen
to start timing and stop it by pressed
longer again.
Silent Alarm & Sedentary
Silent Alarm
You can set up to 3 different alarm
times in the App and the device
will vibrate at the set alarm time.
Sedentary
The device will vibrate to remind
you to walk around after sitting
for more than 1 hour. You can
turn on/off in the App.
General lnfo and Specifications
1. Environmental Condition.
Operating temperature 14°F to 122°F （ -10℃ to 50℃）
Non-operating temperature -4°F to 140°F (-20℃t o 60℃)
2. Fit for Wrist Size
Normally fit between 5.5 to 7.7 inches wrist's width
3. Materials
The device classic band is made of flexible and durable
elastomer material and the stainless steel buckle with
vacuum vapor plating, which makes the color last longer.
4. Wireless Techonlogy
The device contains bluetooth 4.0 which enables it to receive
messages from messages Apps such as WhatsApp, Facebook,
Wechat, etc and incoming phone call from your smart phone
while sync to your smart phone.
5. Haptic & Visual Feedback
The device includes a vibration motor for alarm, notification
and message of an incoming phone call for your smart
phone. While charging, it will have blue light on the top of the
display and will remind ON as for unread notification or
message.
Should the bluetooth connection always turn on? Will the
data be saved if it is disconnected?
Movement and sleep data is stored in the device until data is
synchronized. When the device is connected to the App, the
data of the bracelet will be automatically uploaded to the App
synchronously. The device can store data for about 7 days.
When the space is full, the system will automatically overlap
the earliest data in a loop. Please remember to frequently
synchronize the data to the App.
Notice: If you need to turn on the function of incoming call and
message reminder, you must keep the bluetooth in the device
connected to the App. After setting the alarm, you can support
offline operation.
Why can't the bracelet charging?
Please check if the host is inserted in the correct direction;
please check if the charging contact is clamped firmly.
Is the bracelet waterproof?
The bracelet is dust proof and IP67 waterproof. It can be worn
normally when washing face and hands in cold water.
When Android phones are receiving calls, why the
bracelet can not remind after phone call and messages?
Frequently Asked Question
Why is GPS not available on APP?
It is necessary to turn on the GPS function from the smart phone to
get the GPS signal. It is hard to receive the signal in the closed area,
open area will be best to receive the GPS signal.
Why does bluetooth fail to connect occasionally?
The bluetooth service for some smart phones will occasionally
appear abnormal which resulting a failure of bluetooth connection.
You may try to set up a connection again by restarting the smart
phone or re-switching bluetooth.
Housing
Charging Point
Light sensor
Touch
Display
Strap
How to remove the Strap
Back diagram
SMART FIT WATCH
USER MANUAL
Downloading the App
Please download and install the App on your Smart
phone from the following QR code first before using.
Scan QR Code and Download “CeeFit ”
Specification
Item#: SMW-004B
Device name: G10
Screen: 1.3' FT
Wristband material: TPU
Battery capacity: 170mAh
Bluetooth version: 4.0 and above
System Support: Android 4.4, iOS9.0
and above
Utility time: 7~10 days
Stand-by time: 20 days
Charging time: about 2h
Sensor: Green light
Dynamic heart rate sensor
OTHERSHUTTER
MESSAGE PLAYER
EXERCISE
Messages
The device can sync incoming
notification from Twitter, Facebook,
Whatsapp, Instagram, etc. The most
recent 3 messages can be stored.
Note: You can turn this function on/
off in the App.
1. Please make sure the self-start and notification option is turn
on in the App.
2. Add the App in the Android background.
3. Make sure the calls, messages or SNS software in the Android
phonesystem is turn on
4. While the App has no message reminder, please resend the
device, reconnect and open the App.
All the health related measurement data such as blood pressure
etc is for reference only. It is not for medical purpose.
As the product function is constantly updated, the App user
manual shall prevail for the specific instructions.
IMPORTANT! Your satisfaction is very important to us, PLEASE DO NOT
RETURN UNTIL YOU HAVE CONTACTED US:
[e-mail] or 1- 877 - 90SUNNY (877-907-8669)
G10
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.