User's Manual

Clock, Alarm and Operation

ON/OFF setting. After configuring all the settings, press “OK” key to

confirm and to return to the clock display screen.

Tips: When you finish setting up the clock and alarm, please press the

“OK” key to confirm and exit. The clock and alarm setting changes will

not take effect unless the “OK” key is pressed to confirm; Otherwise the

setting on screen will blink 20 seconds, then the screen returns back to

original clock screen automatically, and no change is made.

4.2.1 Clock setting

Press “M”key 1 time, clock hour digit flashes on screen, and you can

start setting the clock hour by pressing the ‘’+”, “-” keys to adjust; After

setting the correct hour, press “M”key again, then the clock minute

digit flashes on screen, and you can start setting the clock minute by

pressing the ‘’+”, “-” keys to adjust; After setting the correct hour and

minute, press “OK” key to confirm the time setting and return to the

clock display screen.

Tips: The time is displayed in 12-hour format, with AM/PM for

morning/afternoon. While setting the clock hour, keep pressing the ‘’+”

key, and AM/PM will automatically switch.

4.2.2 Alarm-1 setting

Press “M” key 3 times to start alarm-1 setting: the alarm hour flashes

after pressing “M” key 3 times, and press “+”, “-”key to adjust the alarm

hour; press “M” key again, the alarm minute flashes, and press “+”,