Super Charging Station with Alarm Clock CF-W15 User Manual (Version 1.
Table of Contents Ⅰ. Product Introduction ....................................................................2 1.1 Clock & Alarm ...........................................................................................................2 1.2 Input..........................................................................................................................2 1.3 Output.......................................................................................................................2 Ⅱ.
Thank you for your support Thank you for choosing our product, we are committed to research and development and manufacturing of high-quality and practical products. This manual introduces the function and usage of this new product in detail. Please read this manual for a few minutes before using the product, so that this product can be used correctly and the full functionality of the product can be utilized for your benefit.
Product Introduction Ⅰ. Product Introduction This product is a multi-function charger with alarm clock, which can typically be used at home/hotel bedside tables, office desktops, etc. as a fashionable decoration unit. Functions of the product are: clock, alarm, wired charging (fast charge), wireless charging (Qi fast charge), handy night light, and AC outlet. 1.1 Clock & Alarm The clock is a 12-hour clock with AM and PM indicators, and the digital screen of the clock is displayed in 88:88 mode.
Product Introduction the AC-input socket, and the output electrical properties are the same as the AC input. 1.3.2 USB output: the 3 USB outputs are USB-A QC3.0 (5V 3A/9V 2A/12V 1.5A), USB-A 5V 1A, and USB Type-C PD 18W (5V 3A/9V 2A/12V 1.5A). 1.3.3 Wireless output: Qi (10W) fast charging. The wireless charging indicator lights up on the clock screen when wireless charging is in operation.
Input Operation Ⅱ. Input Operation To provide external power for the product, please use the included power cable to connect it to 100V-240V 50/60Hz AC power source, and turn on the ON/OFF switch ( when the "∣" on the switch is pressed down). When turning off the ON/OFF switch ( when the "O" on the switch is pressed down), the internal battery provides power to the product. Tips: The ON/OFF switch on the back doesn’t control the clock screen brightness.
Output Operation Ⅲ. Output Operation 3.1 The Definition of the Output Interfaces 1) USB-A-QC 3.0: Supports QC3.0 fast charge protocol, (5V 3A/9V 2A/12V 1.5A). 2) Type-C-PD18W: Supports PD (18W) output (5V 3A/9V 2A/12V 1.5A). 3) USB-A-5V1A: Supports 5V 1A output. 4) Wireless charging output (10W): The top of the charging station is the wireless charging output area.
Output Operation 5) AC Output：Two US standard three-pin sockets AC-OUT1 and ACOUT2 support AC100V-240V 50/60Hz AC output ( the same electrical properties as the AC input ). 3.2 Output Operation Guide Two power modes: external and internal External AC power mode: use the included power cable to connect it to 100V-240V 50/60Hz AC power source, and turn on the ON/OFF switch ( when the "∣" on the switch is pressed down).
Output Operation 3.2.1 USB Output External AC power mode: all 3 ports (USB-A-QC3.0, Type-C-PD-18W, and USB-A-5V1A) are active, and they can charge mobile phones, tablets, digital cameras and other electronics devices. However, when USB-AQC3.0 and Type-C-PD-18W are used simultaneously, only 5V3A charging is supported, and the combined output power of the two interfaces is 15W. 23W is the max output of USB ports when USB-A-5V1A is used and one of these 2 ports (USB-A-QC3.0, Type-C-PD-18W) is used.
Output Operation 3.3 Wireless Charging External AC power mode: the wireless charger can support 5W, 7.5W, 10W multiple wireless charging methods. When any wireless-chargingcapable device is placed on the top of the charging station, the charging starts and wireless indicator on the screen is turned on . Internal battery power mode: wireless charging supports only 5W.
Clock, Alarm and Operation Ⅳ. Clock, Alarm and Operation 4.1 Button Definition “OK”：Enter “M”：Mode switching “+”：Plus “-”：Minus Knob switch: Turn the switch clockwise to increase the brightness of the screen, and turn it to the brightest; turn the switch counterclockwise to decrease the brightness, clock screen is completely turned off when you hear the“click” sound. 4.
Clock, Alarm and Operation ON/OFF setting. After configuring all the settings, press “OK” key to confirm and to return to the clock display screen. Tips: When you finish setting up the clock and alarm, please press the “OK” key to confirm and exit. The clock and alarm setting changes will not take effect unless the “OK” key is pressed to confirm; Otherwise the setting on screen will blink 20 seconds, then the screen returns back to original clock screen automatically, and no change is made. 4.2.
Clock, Alarm and Operation “-”key to adjust the alarm minute; press “M” key again, the alarm-1 ON/OFF setting （ON 、OFF flashes, and press “+” key to switch ON the alarm ）; press “OK” key to confirm alarm-1 setting and return to the clock display screen. Tips: When alarm is ON, the indicator when the alarm is OFF, this indicator is displayed on screen; and will not be displayed when you return to the clock display screen. 4.2.
Clock, Alarm and Operation keys:“M”, “OK”, “+” and“-”, and the sound will stop. If no key is pressed, the alarm sound will continue for 20 minutes and then stop automatically . The alarm repeats daily unless it is switched OFF, and none of the alarm indicators (ON 、OFF ) will appear on the clock display screen when the alarms are switched OFF. 4.2.
Clock, Alarm and Operation Digital displays: clock, morning, afternoon, alarm clock 1, alarm clock 2, wireless charger, battery status.
Tips Tips ● This product is to be charged at least once every three months to ensure that the battery is in normal operation, and there is no overdischarge of the battery to damage the battery. ● Keep it dry, and do not expose it to strong sunlight, so as not to affect the service life of the product. ● Do not place this product in water or flames, or in high-voltage appliances or ovens to avoid danger. ● The AC output socket is a strong electrical output interface.
Appendix The following table shows the complete reference for step-by-step setup for the clock and the 2 alarms.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
