User's Manual

successful connection, the controller automatically shut down.
5) The controller in the online state, you can set the controller shutdown time through the console,
usually 10 minutes / 30 minutes / 60 minutes / no power off.
6. Reset the controller
1) When there is an abnormality in the controller, such as the wrong button, dead, can not be
connected to the fault, you can try to restart the controller.
2) Reset method: Insert a thin item into the Reset hole on the back of the controller, press the Reset
button to reset the controller.
7. Electrical parameters
1) Electrical parameters
(All voltages referenced to GND, ambient temperature is 25°C)
Parameters
Symbols
Conditions
Min. value
Typical values
Max. value
Unit
Working voltage
Vo
Complete machine
3.5
4.5
V
Working current
Io
Complete machine
60
mA
Sleeping current
Isp
Complete machine
0
uA
Motor current
Im
Vibration
60
80
100
mA
2) Ultimate rating
(All voltages referenced to GND, ambient temperature is 25°C)
Parameters
Symbols
Rating
Unit
Input Voltage
USB_V
IN
5.5
V
Input Current
USB_ I
IN
1000
mA
Working temperature range
T
J
0-40
C
Storage temperature
T
STG
-20-60
C