User's Manual

2. Product Overview
1) This controller supports all versions of the PS4 console and console games.
2) With 18 buttons (△, ○, ╳, □, Up, Down, Left, Right, L3, R3, Options, Share, PS, touch, L1, R1,
Turbo, Clear), two analog buttons (L2 /R2), four programming buttons (Fn=F1/F2) and two analog
3D joysticks.
3) Support touch function, six-axis control, audio headset, motor, RGB light display.
4) Connection method: wired connection to pairing with the PS4 console, Bluetooth wireless
connection.
3. Operating Instructions
1) The controller in the off state, use the USB cable to connect with the PS4 console. About two
seconds after the controller and PS4 Console pairing success.
2) Press the PS button to turn on the controller, the controller is connected to the PS4 console within
3-5 seconds.
3) Once connected, the controller light shows white light, select the user to press the confirmation
button (○ key) after the controller shows the channel light.
4) The controller and the PS4 console only need to pair once, subsequent connections press the PS
key to power on to connect to the console.
4. Programming function settings
1) Programming function setting: F1, F2, for the two back programming keys, the specific settings
are as follows: the controller in the connected state, press and hold the combination button
“SHARE + Fn” for 2 seconds (Fn for F1-2 any key), the controller into the programming mode, the