User's Manual

SAFETY WARNINGS
 Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission)
and make sure the parking brake is engaged.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
• Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark
plugs. These components create hazardous voltages when the engine is running.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
• Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
・ Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a
clean cloth to clean the outside of the equipment as necessary.
・ Do not drive the vehicle and operate the test equipment at the same time. Any distraction may
cause an accident.
• Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures
and precautions. Failure to do so may result in personal injury or damage to the test equipment.
• To avoid damaging the test equipment or generating false data, make sure the vehicle battery is
fully charged and the connection to the vehicle DLC is clean and secure.
・ Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic
interference can damage the equipment.
Warranty
Warranty Ordinance: Limited three months warranty for Tablet and two years warranty for M400 VCI.
No Warranty Provided in Following Conditions:
1. Warranty service is not provided beyond the warranty period.
2. Product damage caused by incorrect installation or improper operation.
3. Self-modification, replacement of internal parts, and other man-made damage, etc.
4. Product damaged by natural disasters, accidents, infiltration of liquids,etc