User's Manual

35
2. Click Sound.
3. Click the Screen key tone and screen lock alert tone.
Display settings
z Adjust screen brightness
1. Click the application icon to enter the settings application on the Homepage.
2. Click Display.
3. Click Brightness.
4. Pop up the brightness setup panel, and drag the brightness bar to left or to right to adjust
the brightness.
5. ClickOK.
z Adjust screen standby time
1. Click the application icon to enter the settings application on the Homepage.
2. Click Display.
3. Scroll down the screen and then click Sleep.
4. Pop up screen standby time settings and choose the standby time you want.
9.2 Security and Location
1. Set unlock pattern
You can set your own unlock pattern (equivalent to the password) to protect the privacy of
your MID.
1. Click the application icon to enter the settings application on the Homepage.
2. Click Security.
3. Click Set screen lock.
4. ClickPattern.
5. Pop up unlock pattern panel with 9 contacts, at least four of which are connected
vertically, horizontally or diagonally. Put fingers away from the screen upon completion
and the system will record the pattern you set.
6. ClickContinue.
7. Draw the screen unlock pattern again when the prompt appears and click OK.
Tips: If you do not want the unlock graphics display on the screen while unlocking,
please clear the check box of Use visible pattern.