Operator's Manual

6-5
view the diagnosis result and print the report.
If the auto upload function is not enabled or the upload fails, ECG
data will be automatically stored in the device, and they can be
manually uploaded to the server in the file management menu.
6.5 Printing Reports
You can print ECG reports through an external printer. Refer to
3.3.11 Connecting the Printer for methods for connecting the printer
to your device. Before printing a report, check that the paper is
properly loaded. To load the paper for the external printer, refer to
the printer’s accompanying instructions for use.
The 10.1” device can also be configured with a recorder base to
output the ECG reports. Before printing a report, refer to
3.3.3
Loading the Recording Paper
for loading paper for the recorder
base.
Note 
If the [Preview] option in the [ECG Setup] screen is disabled, the device
automatically prints the ECG report after the ECG data is acquired and
analyzed.
Note 
If the [Printout] option in the [Record Setup] screen is disabled, click the
[Start] button to save but can not print the ECG report.
You can also print reports by exporting them to a USB flash disk.