Operator's Manual

6-4
 Measurement parameters, including:
Sampling Time (s), Total QRS, Heart Rate (bpm), Average RR
Interval (ms), Max RR Interval (ms), Min RR Interval (ms),Max/Min
(Ratio of Maximum RR Interval to Minimum RR Interval)
Time-domain analysis index:
SDNN (Standard Deviation of Normal to Normal Intervals) (ms)
RMSSD (The Root Mean Square Successive Difference) (ms)
Frequency-domain analysis indexes:
Total Power (ms*ms), VLF (extremely low frequency, ms*ms), LF
(low frequency, ms*ms), LFnorm (nu), HF (high frequency ms*ms),
HFnorm (nu), LF/HF
 RR Histogram
 RR Interval Diff Histogram
 Frequency Chart
6.4.2 AI Diagnosis
In the AI Server login mode, after the ECG waveform is stable, click
the [Start] button, the device starts recording the ECG waveform. If
you have enabled [Auto Upload] from the [ECG Setup] screen, ECG
data is automatically uploaded to the connected AI server for
analysis at the completion of ECG acquisition. After the server
returns the diagnosis report, the status of the relevant patient record
in the file management menu will change to "Diagnosed", you can