Operator's Manual

6-1
Chapter 6 Acquisition, Analysis and Printing
6.1 Selecting the Working Mode
The device supports manual and automatic measurement
(pre-sampling, real-time sampling, periodic sampling, trigger
sampling), and R-R analysis.
To select the working mode, follow the steps below:
1. In the main screen, click [ ] → [Setup] to enter the setting
screen.
2. Click [ECG Setup] → [Sampling Mode] to configure the sampling
mode as needed.
3. Return to the main screen after setting.
4. Click the [Mode] button at the bottom of the main screen to
quickly select the desired working mode.
Caution
The working mode can not be changed during the printing course. Stop
printing the report before changing the working mode.
6.2 Selecting the Lead Mode
The device supports 6 lead modes: 9-lead, standard 12-lead,
15-lead (Standard + right chest), 15-lead (Standard + posterior),
15-lead (Pediatric) and 18-lead.