Operator's Manual

5-2
screen.
3. Select the required information items, ID mode, etc.
4. For specific setting information, see 8.2 Patient Info Setup.
5.2 Entering Patient Information
Use any of the following methods to enter patient information before
taking an ECG examination.
 Enter patient information manually
 Read patient ID with the device’s camera
 Read patient ID with a barcode reader
 Select a patient from the Order List
Entering Patient Information Manually
To manually enter the patient information, follow the steps below:
1. Click the patient information area in the main screen to open the
patient information screen. Or click [File] → [Patient Info] to enter
the patient information screen.
2. Enter patient information in the patient information screen.
3. Click the [OK] button to save the patient information.
4. Click the [Reset] button to clear and re-enter the patient
information.
5. Click the [Cancel] button to exit without saving the patient