Operator's Manual

3-17
paste evenly to the electrode area on the limb.
3. Daub a thin layer of conductive paste on the metal part of the
limb electrode clamp.
4. Connect the electrode to the limb, and make sure that the metal
part is placed on the electrode area above the ankle or the wrist.
5. Attach all limb electrodes in the same way.
 Attaching Chest and Back Electrodes
To attach the chest and back electrodes, follow the steps below:
1. Check the electrodes and ensure that they are clean.
2. When the patient's skin is ready, daub a thin layer of conductive
paste evenly to the electrode area on the chest / back.
3. Daub a thin layer of conductive paste on the brim of the metal
cup of the electrode.
4. Place the electrode on the chest electrode site and squeeze the
suction bulb, and then release it until the electrode is firmly
attached to the corresponding part.
5. Attach all chest electrodes in the same way.
Suction bulb
Electrode
Metal cup