Operator's Manual

3-12
 When selecting [Network Printer], you need to set the IP
address and port number of the network printer, and use it after
the connection is successful.
 When selecting [USB Printer], plug the USB cable supplied with
the printer into an appropriate USB adapter which has been
inserted ino the device. Make sure the USB printer is connected
successfully.
3.3.12 Setting Up the Device
Set up the device before using it for the first time. The operation
steps are as follows:
1. Click the [ ] button in the lower right corner of the main screen
to open the menu screen.
2. Click the [Setup] button to enter the setting screen.
3. Set the system date and time, screen brightness and other
items as required.
For more information about device settings, see
Chapter 8 System
Settings
for details.