Operator's Manual

3-10

Check that the power cord is securely connected if the recorder is

grounded.

 Patient Cable:

Make sure that the patient cable is connected to the device firmly.

 Electrodes:

Make sure that all electrodes are connected to lead wires of the

patient cable correctly. Ensure that the electrodes, especially the

chest electrodes do not contact with each other.

 Patient:

The patient’s hands and feet should not come into contact with

conducting objects such as the metal part of the bed.

Ensure that the patient is warm and relaxed, and breathes calmly.

3.3.10 Login and Account Management

 Power-On and Login

Press the Power On/Off key to turn on the device, it will enter the

startup screen, and then enter the login screen. The login method

depends on the diagnostic mode configured by the device.

 Auto diagnosis mode

You need to input the correct password (initial password: 135790) to