Operator's Manual

3-8
3.3.8 Connecting the Patient Cable and Electrodes (Applied Part)
 Connecting the Patient Cable
Connect the patient cable to the patient cable connector of the
device, and then tighten the knobs on both sides of the patient cable
plug to secure it.
 Connecting the Electrodes
Connect the electrode connectors with chest electrodes and limb
electrodes respectively. The electrode identifiers and color codes of
the internationally accepted European and American standards are
shown in the table below.
According to different standards, electrode codes and colors are
different. This device adopts Wilson lead system.
European Standard
American Standard
Identifier
Color Code
Identifier
Color Code
R
Red
RA
White
L
Yellow
LA
Black
N or RF
Black
RL
Green
F
Green
LL
Red
C1
White/Red
V1
Brown/Red
C2
White/Yellow
V2
Brown/Yellow
C3
White/Green
V3
Brown/Green
C4
White/Brown
V4
Brown/Blue