Operator's Manual

3-7
3.3.5 Connecting AC Power to the Base
To connect the AC power to the base, follow the steps below:
1. Insert the three-wire plug of the power cable into an AC
receptacle.
2. Insert the other end of the power cable into the AC power input
on the base.
3. Check whether the AC power indicator is on to ensure that the
AC power supply is connected well.
3.3.6 Connecting the Grounding Cable
When using the device together with other devices, connect their
equipotential grounding terminals together with grounding cable to
eliminate the potential differences between them.
3.3.7 Using the DC Power Source
To connect the DC power supply to the device, follow the steps
below:
1. Insert the two-wire plug of the DC adapter into an AC
receptacle.
2. Insert the connector of the DC adapter into the DC port of the
device.
3. Check whether the DC power indicator is on to ensure that the
DC power supply is connected well.