Operator's Manual

3-6
To install the recording paper, follow the steps below:
1. As shown in the figure above, push the open button on the right
side of the base and press forward slightly to open the paper
compartment cover.
2. Take out the paper roller, insert it into the new roll paper and put
the paper with roller back into the paper compartment. Be sure
to place the movable end of the paper roller close to the open
button side, and make sure that the paper is installed with the
paper’s grid side facing up.
3. Pull out the paper from the paper outlet of the recorder base and
close the paper compartment cover.
3.3.4 Connecting the Device to the Base
Connect the device to the recorder base as shown in the figure
below: